Double-Flue Chimney Repair on a Lincolnwood Brick Home
A double-flue tan brick chimney in Lincolnwood with spalled brick at the base and under the crown was repaired from roof-edge scaffolding.
- Location Lincolnwood, IL
- Service Chimney Repair
- Scope Repair of a double-flue brick chimney with spalled brick
- Building Tan textured brick home with a two-flue chimney on a shingle roof
- Access Frame scaffolding at the roof edge with rope hoist
The Problem
This chimney repair in Lincolnwood was on a tan brick home with a textured face brick. The chimney carries two flues, each with its own cap, under one concrete crown. From the roof, the damage is easy to see.
Near the bottom, where the chimney steps out at the roof line, many bricks have lost their faces. That is spalled brick: water soaks in, freezes, and pops the outer layer off in flakes and chunks. Just under the crown, the corner courses have the same problem, with open joints and broken brick. The crown itself is weathered and stained. The crown and caps also show years of weather. Damage at both the top and the bottom tells you water is getting in from above through the crown and joints, and collecting where the chimney meets the roof. Our post on why chimney brick spalls explains the process in more detail.
Our Solution
The crew set frame scaffolding from the front yard up to the roof edge, with planks run across to the chimney and a rope and wheel on a pole for lifting brick and mortar. Drop cloths went down on the roof around the work area. A full deck at chimney height means the masons can work the base and the top without standing on the shingles.
The standard repair for damage like this is to cut out the spalled brick, clean the openings and set new brick to match, then grind out and repoint the failed joints. Under the crown, loose courses are taken off and relaid. A chimney with two flues also needs the crown checked around both flue tiles, since water often gets in at those joints. Our chimney repair service page covers the repairs we do most often, and our article on how a multi-flue chimney works explains why each flue needs its own cap and a sound crown around it.
The Result
Catching spalling while it is still at the corners and the base keeps the repair to replacing brick and repointing, instead of rebuilding the whole stack. Left another few winters, the loose brick under the crown would likely have meant taking the top down. If your own chimney is shedding brick faces onto the roof, chimney repair in Lincolnwood is a short trip for our Park Ridge crew. See another brick repair job in our Park Ridge chimney brick repair, and visit our Lincolnwood service area page for more.
Need Chimney Repair for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
When Repointing Was Not Enough: A Chimney Top Rebuild in Libertyville
Spalled brick and a broken crown at the top of a Libertyville chimney were torn down to sound masonry and the top was rebuilt with a new crown.
View case study
Evanston Chimney Repair on a Common Brick Two-Story
A common brick chimney on an Evanston two-story got a new crown formed in steel and a stainless cap on the flue.
View case study
Limestone Chimney Restoration on a Stone-and-Siding Glenview Home
A tall limestone chimney on a stone and siding Glenview home was restored from a full-height scaffold tower.
View case study