Call Now Request Quote
Chimney Cap Repair Completed May 2026 · Park Ridge

Chimney Cap Repair and Brick Replacement in Park Ridge

Spalled and missing bricks on a dark brick chimney in Park Ridge were cut out and replaced, and a stainless mesh cap was set on the crown.

  • Location Park Ridge, IL
  • Service Chimney Cap Repair
  • Scope Spalled, cracked and missing bricks cut out and replaced, stainless mesh cap set on the crown
  • Building Brick home with a dark brick chimney on the gable end
  • Access Frame scaffolding in the side yard plus roof planks
  • Completed May 2026
Dark brick chimney in Park Ridge with spalled, displaced and missing bricks below a concrete crown and metal cap
Before Before: blown brick faces, displaced courses and gaps along one corner.

The Problem

This chimney cap repair in Park Ridge started with a dark brick chimney on the gable end of a brick home. Below the concrete crown, one corner of the stack had come apart. Brick faces had popped off, several bricks had shifted out of line, and in a few spots bricks were missing outright, leaving open holes into the chimney.

That pattern is classic freeze-thaw damage. Water gets in through the top and through worn joints, freezes inside the brick, and pushes the face off. Once a few bricks go, the ones around them lose support and the damage spreads along the corner. Our post on spalling chimney brick explains why it tends to start near the top. A cap and a sound crown are what keep that water out in the first place.

Our Solution

We set up frame scaffolding in the side yard with a deck at chimney height and laid planks on the roof so the crew could reach every face. The damaged bricks were cut out by hand, one at a time, along with the loose mortar around them, until each opening was down to solid masonry.

New brick chosen to blend with the dark original went back into each opening, set in fresh mortar and tooled to match the existing joints. Working brick by brick like this keeps the sound part of the chimney intact and only replaces what has failed, which costs far less than a rebuild when the damage is limited to one area.

At the top, a stainless steel chimney cap with mesh sides was set over the flue on the crown. The cap keeps rain, snow, leaves and animals out of the flue, and its wide lid throws water off the crown. Our guide to caps and crowns covers why these two parts matter so much.

The Result

The chimney is whole again, with the broken corner rebuilt in matching brick and a stainless cap protecting the flue. This kind of chimney cap repair paired with targeted brick work stops the damage before it reaches the point of a full rebuild. For chimney cap repair in Park Ridge or nearby, see our Park Ridge service area page, or another local job, our chimney crown rebuild in Park Ridge. Call Delta Chimneys at (847) 685-1043.

Project Location

Park Ridge, IL · See our Park Ridge service area

Get similar work done

Need Chimney Cap Repair for your home?

Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.