Chimney Repair in Park Ridge: Tan Brick Rebuild with a New Crown
A tan brick chimney in Park Ridge was rebuilt from the roofline up, with a new crown that overhangs the brick and a new multi-flue cap.
- Location Park Ridge, IL
- Service Chimney Replacement
- Scope Rebuilt above the roofline, new crown, new cap
- Building Tan brick home with vertical siding and a full-height exterior chimney
- Access Frame scaffolding with outrigger brackets and rope hoist
The Problem
This chimney repair in Park Ridge was on a tan brick home with a full-height exterior chimney that runs up the side of the house and through the eave. The section above the roof is the part that takes all the weather, and it was the part that needed to come down.
The roof-level photo shows what the top looked like before the work. The old crown is worn and chipped at the edges, the joints near the top are open, and some of the upper brick has shifted. That is a common pattern on chimneys in Park Ridge and across the Northwest suburbs. Water gets in at the crown, freezes in the joints, and pushes the top courses apart a little more every winter. Once the brick itself moves, repointing will not hold it, and the reliable fix is to rebuild from the roofline up. Our post on spalling and loose chimney brick covers the warning signs.
Our Solution
Before any brick came off, the crew spread drop cloths over the shingles around the chimney to protect the roof from falling mortar and debris. Frame scaffolding went up beside the chimney, with outrigger brackets clamped on the house side so the masons could reach all four faces from a solid deck. A rope and wheel at the top of a pole carried materials up from the ground.
The chimney rebuild went from the roofline to the top, with new tan brick laid in fresh mortar and kept plumb and level course by course. New metal flashing is visible where the chimney meets the roof. At the top, the crew built forms around the stack and poured a new crown that projects past the brick, so water drips clear of the face instead of running down it. A black multi-flue cap was set over the top to keep rain and animals out. Our chimney rebuild and replacement service page explains how we plan this kind of work, and if you are wondering about permits, our guide to chimney permits in Park Ridge and nearby suburbs covers the basics.
The Result
The finished stack is plumb, the new brick is a close tan to the rest of the house, and the new chimney crown and cap close off the top. For another Park Ridge job focused on the top of the chimney, see our Park Ridge crown rebuild. Our office is in Park Ridge, so if you need chimney repair in Park Ridge, we are close by. Visit our Park Ridge service area page to learn more.
Need Chimney Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Chimney Cap Repair and Brick Replacement in Park Ridge
Spalled and missing bricks on a dark brick chimney in Park Ridge were cut out and replaced, and a stainless mesh cap was set on the crown.
View case study
Chimney Restoration in Park Ridge: A Poured Crown for a Wide Mid-Century Chimney
A wide mid-century chimney in Park Ridge got a new reinforced crown, formed and poured in one piece around its three flues, with new caps.
View case study
Chimney Repair in Chicago: Rebuilding a Tall Flat-Roof Chimney
A tall chimney on a Chicago flat roof was rebuilt in new brick from rooftop scaffolding, with the base sealed to the roof membrane.
View case study