Chimney Repair in Chicago: Rebuilding a Tall Flat-Roof Chimney
A tall chimney on a Chicago flat roof was rebuilt in new brick from rooftop scaffolding, with the base sealed to the roof membrane.
- Location Chicago, IL
- Service Chimney Replacement
- Scope Rebuild of the chimney stack above a flat roof, new brick and mortar, base sealed to the roofing
- Building Multi-story masonry building with a flat roof and parapet wall
- Access Rooftop scaffolding with a rope and pulley hoist
The Problem
This job was chimney repair in Chicago on a building with a flat roof and a tall, freestanding chimney. Stacks like this one stand alone above the roof deck with nothing around them to break the wind, rain or snow. Every side takes weather, and the top takes the most. Once the mortar joints start to wash out and the brick at the top loosens, water gets into the core of the stack and the damage speeds up each winter.
On a tall chimney the problem is rarely limited to one spot. Freeze-thaw cycles open the joints, the top courses shift, and the base where the chimney meets the roofing becomes a leak point. When enough of the masonry above the roof has failed, patching single bricks stops making sense. The sound approach is to take the stack down to solid masonry and rebuild it. Our guide to rebuild versus repair costs walks through how we make that call.
Our Solution
We set up scaffolding right on the roof deck and rigged a rope and pulley hoist to move brick, mortar and debris up and down without dragging material across the roofing. Working from the scaffold, the crew took the chimney down and laid it back up in new brick with full mortar joints, keeping the stack plumb and square as it went up. The top was finished with a corbelled course of darker brick to match the look of the original.
A full chimney rebuild above the roofline is only as good as its connection to the roof. At the base, the new masonry was tied into the flat-roof membrane so water running across the deck cannot get in behind the brick. This detail is where most flat roof chimney repair work succeeds or fails, because standing water on a low-slope roof finds any gap.
If you want to see how a rebuild runs from tear-down to final course, our write-up on chimney rebuild scope and process covers each step.
The Result
The building now has a straight, solid chimney in fresh brick with clean joints from the roof line to the top course, and a sealed base where it meets the roofing. This chimney rebuild in Chicago gives the owner a stack built to handle many more winters of wind and freeze-thaw. For more of our work across the city and nearby suburbs, see our Chicago chimney service area, or compare it with this chimney top rebuild in Libertyville. When you need chimney repair in Chicago on a flat or pitched roof, call Delta Chimneys at (847) 685-1043.
Need Chimney Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Rebuilding a Two-Story Chimney on a Glenview Brick Colonial
A tall exterior chimney on a two-story Glenview brick colonial was rebuilt above the roofline from a scaffold tower, with a new top and crown.
View case study
Chimney Repair in Highland Park: Rebuilding a Painted Brick Stack
A wide painted brick chimney in Highland Park was taken down above the roofline and rebuilt around its two flues from deck-to-roof scaffolding.
View case study
Chimney Repair in Lake Forest, IL: Rebuild and New Cap on a Colonial
A tall brick chimney on a sided Lake Forest colonial was rebuilt at the top from a side-yard scaffold tower and finished with a new cap.
View case study