Rebuilding a Two-Story Chimney on a Glenview Brick Colonial
A tall exterior chimney on a two-story Glenview brick colonial was rebuilt above the roofline from a scaffold tower, with a new top and crown.
- Location Glenview, IL
- Service Chimney Replacement
- Scope Upper chimney rebuilt in matching red brick from above the roofline, new top and crown
- Building Two-story red brick colonial with an exterior chimney
- Access Multi-level frame scaffolding with a pulley hoist, set up in the back yard
- Completed May 2026
The Problem
Homeowners comparing chimney repair companies in Glenview often have the same kind of chimney this family did: a tall exterior stack on a two-story brick colonial, rising from the yard past the second-floor eave and well above the roof. A chimney this high takes the full force of wind and weather on every face, and the top section, the part you can't see well from the ground, is where the trouble usually starts.
Water that gets past a worn crown or open mortar joints soaks into the brick near the top. Each freeze pushes the joints a little wider, and over a few Chicago-area winters the upper courses loosen. Once the masonry above the roofline is no longer sound, the right fix is to take it down to solid brick and build it back. Our post on how a chimney rebuild works explains why.
Our Solution
Access was the first job. The crew built a frame scaffold tower from the back yard up past the roofline, with a working deck at the top of the chimney and a pulley on an upper arm to raise brick and mortar and lower debris. Drop cloths covered the beds at the base so the landscaping stayed clean.
From that deck, the upper part of the chimney was taken down to sound masonry and relaid in red brick chosen to blend with the house. A chimney rebuild on a stack this tall has to stay plumb as it goes up, so the crew checked the lines course by course. The top was finished with a new cap course and crown that sheds water off the brick. A good chimney crown overhangs the brick so rain drips clear of the face instead of running down it.
The Result
The finished chimney stands straight and tight from the shoulders to the top, with fresh joints and a solid crown, and it reads as part of the original house. This chimney rebuild in Glenview is the kind of tall chimney repair that many companies avoid because of the access involved. We set up the scaffolding to do it right. When you talk to chimney repair companies in Glenview, ask each one how they plan to reach the top safely. For more local work, see our Glenview chimney services page or our chimney flashing project in Glenview. Call Delta Chimneys at (847) 685-1043 for an estimate.
Need Chimney Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Double Chimney Rebuild on One Glenview Brick Home
Two tan brick chimneys on one Glenview home were rebuilt at the same time, each from its own scaffold tower.
View case study
Chimney Flashing Repair and New Metal Shroud in Glenview
A leaking roof chimney in Glenview got new flashing membrane at the roof line, a full weather wrap, and a new metal shroud on top.
View case study
Stone Chimney Tuckpointing on a Shingle-Sided Glenview Home
A full-height stone chimney on a shingle-sided Glenview home was repointed and its top repaired, working from a scaffold tower.
View case study