Double Chimney Rebuild on One Glenview Brick Home
Two tan brick chimneys on one Glenview home were rebuilt at the same time, each from its own scaffold tower.
- Location Glenview, IL
- Service Chimney Replacement
- Scope Two chimneys rebuilt at the same time
- Building Two-story tan brick home with siding on the upper walls and two exterior chimneys
- Access Separate frame scaffold tower at each chimney
The Problem
This double chimney rebuild in Glenview was on a two-story tan brick home with siding on the upper walls and two exterior chimneys. Both stacks are built in the same tan brick as the house and rise well above the shingle roof. When one chimney on a house needs a rebuild, the other one has usually seen the same weather for the same number of years, and that was the case here.
The tops of tall chimneys take the most abuse. Rain and snow soak into the crown and the top courses, then freeze and thaw dozens of times each winter. The joints soften, the brick loosens, and eventually the top of the chimney has to come down and go back up. Doing both chimneys in one project means one round of setup, one round of roof protection and one schedule for the homeowner. Our article on how a chimney rebuild is scoped explains how we decide how far down to go.
Our Solution
Each chimney got its own frame scaffold tower, cross braced and planked at the top, with long planks run onto the roof so the masons could work all four sides of the stack. A rope and wheel on a pole carried brick and mortar up from the yard. Drop cloths hang over the gutters and roof edge next to the near chimney to protect the house while old brick comes down.
At the near chimney, the caps were lifted off and set aside on top while the crew opened up the upper courses. The far chimney, on its own scaffold farther along the house, shows forms at the top, which is how a new crown is built in place. On a chimney replacement like this, the damaged brick is removed down to solid masonry, the flue liners are kept in line, and new courses go back up in fresh mortar to match the house. A new crown with an overhang and a chimney cap on each flue finish the top. Our chimney replacement service page covers how we plan work on multiple chimneys, and our guide to chimney cap installation explains why we cap every flue.
The Result
With this double chimney rebuild in Glenview done as one project, this Glenview homeowner has two chimneys on the same footing instead of one new chimney and one waiting to fail. For a single tall chimney done the same way, see our two-story chimney rebuild in Glenview, and find more local projects on our Glenview service area page.
Need Chimney Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Rebuilding a Two-Story Chimney on a Glenview Brick Colonial
A tall exterior chimney on a two-story Glenview brick colonial was rebuilt above the roofline from a scaffold tower, with a new top and crown.
View case study
Chimney Flashing Repair and New Metal Shroud in Glenview
A leaking roof chimney in Glenview got new flashing membrane at the roof line, a full weather wrap, and a new metal shroud on top.
View case study
Stone Chimney Tuckpointing on a Shingle-Sided Glenview Home
A full-height stone chimney on a shingle-sided Glenview home was repointed and its top repaired, working from a scaffold tower.
View case study