Chimney Flashing Repair and New Metal Shroud in Glenview
A leaking roof chimney in Glenview got new flashing membrane at the roof line, a full weather wrap, and a new metal shroud on top.
- Location Glenview, IL
- Service Chimney Flashing Repair
- Scope New flashing membrane where the chimney meets the roof, chimney sides wrapped, new metal shroud at the top
- Building Single-family home with an asphalt shingle roof and a roof-mounted chimney
- Access Roof ladder and planks
The Problem
Most chimney leaks we see in Glenview come from the same place: the joint where the chimney passes through the roof. This job was a chimney flashing repair on a roof-mounted chimney with an asphalt shingle roof around it. Flashing at that joint has to handle water running down the roof slope and water running down the face of the chimney, and when it fails, the leak often shows up as a stain on a ceiling or wall nowhere near the chimney.
Flashing wears out for a few common reasons. Sealant dries and cracks, metal pieces pull away from the masonry as the house moves, and old step flashing gets damaged when a roof is replaced. Our visual guide to flashing failure shows what to look for from the ground, and our post on why a chimney leaks when it rains covers the other suspects.
Our Solution
The crew worked from the roof with a ladder and planks and opened up the base of the chimney down to the roof deck. They laid a self-adhered flashing membrane up the sides of the chimney and out onto the deck, folding it tight at the corners where leaks like to start. On a pitched roof the high side of the chimney matters most, because it catches all the water coming down the slope.
With the base sealed, the sides of the chimney were wrapped in a weather-resistant barrier, lapped over the flashing so water always runs onto the layer below it and never behind it. That shingle-style lapping is the core of good step flashing and counter flashing work. At the top, a new black metal chimney shroud now covers the crown area with a wide drip edge that throws water clear of the walls.
Every chimney flashing repair we do follows the same rule: each layer overlaps the one below it, top to bottom, so gravity does the work.
The Result
The chimney now has continuous flashing where it meets the roof, a wrapped and sealed body, and a metal shroud shedding water at the top. That combination closes the paths water usually takes into the house around a chimney. If you have a ceiling stain near the chimney or want chimney leak repair in Glenview before the next storm, see our Glenview service area page or another local job, our two-story chimney rebuild. Call Delta Chimneys at (847) 685-1043.
Need Chimney Flashing Repair for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Rebuilding a Two-Story Chimney on a Glenview Brick Colonial
A tall exterior chimney on a two-story Glenview brick colonial was rebuilt above the roofline from a scaffold tower, with a new top and crown.
View case study
Stone Chimney Tuckpointing on a Shingle-Sided Glenview Home
A full-height stone chimney on a shingle-sided Glenview home was repointed and its top repaired, working from a scaffold tower.
View case study
Double Chimney Rebuild on One Glenview Brick Home
Two tan brick chimneys on one Glenview home were rebuilt at the same time, each from its own scaffold tower.
View case study