Call Now Request Quote
Masonry Tuckpointing Completed May 2026 · Glenview

Stone Chimney Tuckpointing on a Shingle-Sided Glenview Home

A full-height stone chimney on a shingle-sided Glenview home was repointed and its top repaired, working from a scaffold tower.

  • Location Glenview, IL
  • Service Masonry Tuckpointing
  • Scope Repointed the stone chimney and repaired the top
  • Building Two-story home with shingle siding and a full-height exterior stone chimney
  • Access Full-height frame scaffolding with rope hoist
  • Completed May 2026
Crew on full-height scaffolding tuckpointing a tall exterior stone chimney on a shingle-sided home in Glenview, IL
During Two masons working the top of the stone chimney from the scaffold deck

The Problem

This Glenview home has a full-height exterior chimney built of squared stone, running from the ground past the second-floor gable and well above the roof. Stone like this lasts a very long time. The mortar between the stones does not, and that is where chimney tuckpointing comes in. The job here was to repoint the stone and repair the top of the chimney.

Mortar joints are meant to be the sacrificial part of any masonry wall. Rain soaks into them, freezes overnight and expands, and after enough Chicagoland winters the joints go soft, crack and fall out. On a tall exterior chimney that takes full wind and weather on three sides, the upper joints usually go first. Once they open up, water reaches the inside of the chimney and the top stones can loosen. We explain the process in more detail in our article on freeze-thaw damage to chimneys.

Our Solution

A chimney this tall cannot be worked safely from ladders, so the crew stood a full-height frame scaffold beside it, from the planting bed up past the roofline, with planked decks at several levels. A rope and wheel at the top let the ground man send up mortar and tools while two masons worked the upper section.

Stone chimney repointing follows the same rules as brick. Failed mortar is ground or raked out to a consistent depth, the joints are cleaned, and new mortar is packed in and tooled to match the existing joint profile. With stone, matching the color and joint shape matters even more, because the joints are a big part of how the chimney looks. The top of the chimney, where water hits hardest, was repaired along with the repointing. Our masonry tuckpointing service page covers how we approach mortar repair on chimneys and walls, and our guide to tuckpointing a chimney explains when it makes sense versus a rebuild.

The Result

Chimney tuckpointing done right returns a stone chimney to tight, weather-shedding joints without changing its character. Repointing at the right time is also the cheapest way to avoid a top rebuild later. For homeowners looking for chimney repair in Glenview, this is a good example of saving original stonework instead of replacing it. We also restored a tall limestone chimney nearby, shown in our Glenview stone chimney restoration, and you can see more of our local work on the Glenview service area page.

Project Location

Glenview, IL · See our Glenview service area

Get similar work done

Need Masonry Tuckpointing for your home?

Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.