Chimney Repair in Lake Forest, IL: Rebuild and New Cap on a Colonial
A tall brick chimney on a sided Lake Forest colonial was rebuilt at the top from a side-yard scaffold tower and finished with a new cap.
- Location Lake Forest, IL
- Service Chimney Replacement
- Scope Upper chimney rebuilt in brick, new cap installed
- Building Two-story colonial with lap siding and an exterior brick chimney
- Access Tall frame scaffolding with a pulley hoist, set in the side yard
- Completed April 2026
The Problem
This chimney repair in Lake Forest, IL was on a two-story colonial with lap siding and a tall brick chimney running up the outside wall. At the top, the brick had weathered dark and soft, and a rusted metal band wrapped the top courses under an old mesh cap. Metal like that holds water against the brick, and once it rusts through, it stops protecting anything.
A chimney on the outside of a house gets no warmth from the living space, so it goes through more freeze-thaw cycles than an interior one. Close to the lake, the moisture is heavier too. Our article on how Lake Michigan affects chimneys covers why North Shore chimneys wear faster at the top.
Our Solution
Mature trees and plantings sit right next to this chimney, so the crew built a narrow frame scaffold tower in the side yard, tight to the brick, with decks at several heights and a pulley at the top. That kept the landscaping intact and gave the masons a safe platform all the way to the top of the stack.
The old metal band and cap came off, and the damaged upper brick was taken down to sound masonry. The crew then relaid the top in brick with full mortar joints, working course by course to keep the stack straight above the roofline. A chimney rebuild like this replaces the part of the chimney that weather has beaten up most, instead of covering it with more metal.
The finished stack was topped with a new chimney cap to keep rain, snow and animals out of the flue. Our post on chimney cap installation explains what a good cap needs to do and why fit matters.
The Result
The homeowners have a solid exterior brick chimney again, with a rebuilt top and a new cap in place of the rusted metal. The work was done from the side yard without damage to the trees or beds around it. With the weak top replaced and the flue capped, this chimney is set up for many more North Shore winters. For chimney repair in Lake Forest, IL and nearby towns, see our Lake Forest chimney services or another rebuild nearby, our full-height chimney rebuild in Libertyville. Call Delta Chimneys at (847) 685-1043 to schedule a look.
Need Chimney Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Chimney Repair in Chicago: Rebuilding a Tall Flat-Roof Chimney
A tall chimney on a Chicago flat roof was rebuilt in new brick from rooftop scaffolding, with the base sealed to the roof membrane.
View case study
Rebuilding a Two-Story Chimney on a Glenview Brick Colonial
A tall exterior chimney on a two-story Glenview brick colonial was rebuilt above the roofline from a scaffold tower, with a new top and crown.
View case study
Chimney Repair in Highland Park: Rebuilding a Painted Brick Stack
A wide painted brick chimney in Highland Park was taken down above the roofline and rebuilt around its two flues from deck-to-roof scaffolding.
View case study