Rebuilding a Rotted Multi-Flue Chimney Chase in Palatine
A rotted three-flue chimney chase in Palatine was opened to the framing and rebuilt with cement board, thin brick, new flashing and a sealed top.
- Location Palatine, IL
- Service Chase Cover Replacement
- Scope Chase opened to the framing, rotted wood replaced, cement board sheathing, thin brick veneer, new top cover and roof flashing
- Building Single-family home with an asphalt shingle roof and a framed chase around three metal flues
- Access Roof jacks and planks, drop cloths over the shingles
- Completed May 2026
The Problem
Most people searching for chase cover repair have a leak around a framed chimney, and this Palatine home was a clear case. The chimney here is a wood-framed chase on the roof that carries three metal flues, each with its own cap. From the street it looked like brick. Once the crew opened it up, the framing inside told the real story: dark, water-stained studs, rot along the edges, and an old top that had let water in for a long time.
A chase is only as dry as its top. The cover over a chase has to slope water off and seal tight around every flue, and on a three-flue chase that means three openings to keep watertight. When the cover rusts, dents or loses its seal, water runs straight down into the framing. Our post on what a chimney chase is explains how they are built, and our guide to multi-flue chimneys covers why more flues mean more places for water to get in.
Our Solution
The crew set roof jacks and planks, covered the shingles with drop cloths, and opened the chase down to the framing while all three flues stayed in place. Rotted wood was cut out and replaced so the chase had a solid frame again.
Then the outside was rebuilt to last. Cement board went on over the framing instead of wood sheathing, because it does not rot if it ever gets wet. The crew set thin brick over the cement board, course by course, to give the chase a real masonry face. At the top, a new metal cover went on with sealed collars around each flue, and new flashing was installed where the chase meets the roof. The chase cover replacement and the flashing together are what keep water out of the framing from here on.
If you are not sure if your chimney has a cap or a cover, our post on chase covers versus chimney caps explains the difference.
The Result
The homeowners now have a solid chase with new framing where it was needed, a cement board and brick shell, new flashing and a sealed top around all three flues. It looks like a brick chimney and stays dry like one. For chase cover repair or a full chimney chase rebuild in Palatine, see our Palatine chimney services page or another roof job, our chimney flashing repair in Glenview. Call Delta Chimneys at (847) 685-1043.
Need Chimney Chase Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Chimney Cap Repair and Brick Replacement in Park Ridge
Spalled and missing bricks on a dark brick chimney in Park Ridge were cut out and replaced, and a stainless mesh cap was set on the crown.
View case study
Chimney Restoration in Park Ridge: A Poured Crown for a Wide Mid-Century Chimney
A wide mid-century chimney in Park Ridge got a new reinforced crown, formed and poured in one piece around its three flues, with new caps.
View case study
Chimney Flashing Repair and New Metal Shroud in Glenview
A leaking roof chimney in Glenview got new flashing membrane at the roof line, a full weather wrap, and a new metal shroud on top.
View case study