Rebuilding a Tall Painted Chimney on a Bannockburn Tudor
A tall painted brick chimney on a white stucco Bannockburn Tudor was rebuilt above the roof with a new crown, copper flashing and a fresh white finish.
- Location Bannockburn, IL
- Service Chimney Replacement
- Scope Chimney rebuilt above the roof, painted white to match, new crown, copper step and counter flashing
- Building White stucco Tudor-style home with a steep shingle roof
- Access Roof ladders and roof brackets
The Problem
This chimney rebuild in Bannockburn was on a white stucco Tudor with a steep roof and a tall, painted brick chimney that rises well above the ridge. Tudor chimneys like this one are a big part of how the house looks, with a corbelled band near the top and the brick painted white to match the stucco walls. Keeping that look while fixing the masonry underneath was the whole job.
A chimney this tall and this exposed takes a beating at the top, and paint makes the trouble harder to see. When paint seals in moisture, freeze-thaw cycles push at the brick and joints from the inside until the top courses loosen. Water also finds its way in where the chimney meets the roof if the flashing is old. Our post on freeze-thaw chimney damage explains why Chicago-area chimneys wear out at the top first.
Our Solution
Working from roof ladders and brackets on the steep pitch, the crew rebuilt the chimney above the roof in new brick with full mortar joints, keeping its tall, narrow shape and the corbelled band near the top so it would match the house. A new crown was formed on top with an overhang that throws water clear of the brick, and both flues got caps. Our chimney crown repair guide explains why the overhang matters.
Where the chimney passes through the roof, new copper step flashing and counter flashing were installed, cut in a sawtooth pattern that follows the shingle courses up both sides. Copper lasts a long time on the roof and weathers to a brown tone that suits a Tudor. Good chimney flashing is what keeps a rebuilt chimney from leaking into the attic.
Once the masonry had cured, the chimney was painted white so it matches the stucco walls again. The full chimney rebuild kept the original character of the house while replacing what had worn out.
The Result
The home has a crisp white chimney again, straight and solid above the roof, with a new crown, capped flues and copper flashing that should outlast the shingles around it. From the street it looks the way it always did, only sound. For a chimney rebuild in Bannockburn or nearby North Shore towns, call Delta Chimneys at (847) 685-1043. You can also see a similar job, our painted brick chimney rebuild in Highland Park.
Project Location
Bannockburn, IL
Need Chimney Rebuild for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Chimney Repair in Chicago: Rebuilding a Tall Flat-Roof Chimney
A tall chimney on a Chicago flat roof was rebuilt in new brick from rooftop scaffolding, with the base sealed to the roof membrane.
View case study
Rebuilding a Two-Story Chimney on a Glenview Brick Colonial
A tall exterior chimney on a two-story Glenview brick colonial was rebuilt above the roofline from a scaffold tower, with a new top and crown.
View case study
Chimney Repair in Highland Park: Rebuilding a Painted Brick Stack
A wide painted brick chimney in Highland Park was taken down above the roofline and rebuilt around its two flues from deck-to-roof scaffolding.
View case study