Stone Chimney Repointing and Cap Flashing in Crystal Lake
A stone veneer chimney in Crystal Lake was repointed on every face from roof scaffolding, and the metal cap flashing at the top was redone.
- Location Crystal Lake, IL
- Service Masonry Tuckpointing
- Scope Stone veneer chimney repointed on all faces, metal cap flashing redone at the top
- Building Two-story home with dark board-and-batten siding and a stone veneer chimney
- Access Frame scaffolding set on the roof, drop cloths over the shingles
- Completed May 2026
The Problem
Stone chimney repointing was the fix for this Crystal Lake home, where a stone veneer chimney rises beside a two-story wall of dark board-and-batten siding. The stone itself was in good shape. The trouble was the mortar between the stones, which had worn back and opened up in many spots, especially near the top where weather hits hardest.
Stone joints are wider and less regular than brick joints, so they hold more mortar and lose more when it fails. Open joints let rain into the wall behind the veneer, and freeze-thaw cycles do the rest, loosening stones over time. The metal flashing at the top also mattered. If water gets past the cap flashing, it runs down behind the stone no matter how good the joints are. Our article on chimney masonry repair covers how these problems build on each other.
Our Solution
The crew set frame scaffolding on the roof around the chimney and spread drop cloths over the shingles to catch dust and mortar. Working from the top down, they raked and ground out the loose, failing mortar from the joints until they hit solid material, then packed new mortar in and tooled it to match the look of the original joints.
Grinding out first is the step that separates real repointing from smearing new mortar over old. New mortar needs a clean, deep joint to bond to, or it pops out in a winter or two. Our post on chimney tuckpointing goes into joint depth and why it matters.
At the top, the white metal cap flashing that wraps the crown edge was redone so it laps over the stone and sends water out past the face of the chimney. The flue caps were left in place on top.
The Result
The chimney now has full, tight joints from the roofline to the cap, and the flashing at the top sheds water clear of the stone. The repair keeps the original stone and its character, and it closes the gaps water was using to get behind the veneer. This kind of masonry tuckpointing is often all a stone chimney needs when the stones themselves are sound. For another stone job, see our stone chimney repointing in Glenview, and read about chimney waterproofing as a next step. For stone chimney repair in Crystal Lake, call Delta Chimneys at (847) 685-1043.
Project Location
Crystal Lake, IL
Need Masonry Tuckpointing for your home?
Request an inspection and written repair scope. We document the condition, explain the work, and price it transparently.
Related Projects
Stone Chimney Tuckpointing on a Shingle-Sided Glenview Home
A full-height stone chimney on a shingle-sided Glenview home was repointed and its top repaired, working from a scaffold tower.
View case study
Chimney Cap Repair and Brick Replacement in Park Ridge
Spalled and missing bricks on a dark brick chimney in Park Ridge were cut out and replaced, and a stainless mesh cap was set on the crown.
View case study
Rebuilding a Rotted Multi-Flue Chimney Chase in Palatine
A rotted three-flue chimney chase in Palatine was opened to the framing and rebuilt with cement board, thin brick, new flashing and a sealed top.
View case study